# OHLOOM - Assembly Guide
|
|
## Index
1. Assembly Parts
1.1. [Metal Parts](#metalparts)
1.2. [3D Print Parts](#printparts)
1.3. [CNC Parts](#cncparts)
1.4. [Other Parts](#otherparts)
2. Assembly Preparation
2.1. [Colorful Wood Protection Film](#protection)
3. [Assembly](#assembly)
|
# 1. Assembly Parts
## 1.1. Metal Parts <a name="metalparts">
||||
|:---------:|:------------:|:---:|
|2 x Threaded rod M8 x 180 mm |4 x M8 Nuts|2 x M8 Nuts with Rubber|
|||
|4 x M6 Nuts |4 x M6 Cylinder Screw |
||||
|8 x W60x4 Wood Screw|4 x W35x4 Wood Screw|16 x W12x4 Wood Screw|
|
## 1.2. 3D Print Parts <a name="printparts">
||||
|:---------:|:------------:|:---:|
|2 x Ratchet Wheel|2 x Clamp Ring|5 x Comb Module|
||||
|2 x Ratchet Pawl| 12 x Screw Socket w| 4 x Screw Socket w/o |
||
|2 x Outer Warpcloth Beam (4 parts each)|
|
## 1.3. CNC Parts (Wood) <a name="cncparts">
||||
|:---------:|:------------:|:---:|
|2 x Comb Holder|2 x Side Frame|2 x Cross Beam|
||||
|2 x Slot Beam|2 x String Stick|1 x Shuttle|
|
## 1.4. Other Parts <a name="otherparts">
|||
|:---------:|:------------:|
|2 x Inner Warpcloth Beam| ca. 3 m String|
|
# 2. Assembly Preparation
## 2.1. Colorful Wood Protection Film <a name="protection">
||
|:---------:|
| 1. You will need color pigments, line oil, an empty glass, and a Brush|
||
| 2. First, fill in the pigments (ca. 10-20 grams).|
||
| 3. Next poor 8-10 times as much oil as pigments into the glass.|
||
| 4. Stir it well, until you have got a smooth equally colored liquid without spots.|
||
| 5. Make sure the wooden surface is clean and dry.|
| 6. Apply 1-3 layer, till you have got the wanted look.|
| 7. Let it dry for several hours (or better, leave it overnight).|
|
# 3. Assembly <a name="assembly">
||
|:---------:|
| 1.|
||
| 2.|
||
| 3.|
||
| 4.|
||
| 5.|
||
| 6.|
||
| 7.|
||
| 8.|
||
| 9.|
||
| 10.|
||
| 11.|
||
| Voila! You just finished assembling your first OHLOOM. Congrats! |